Pre-shipment Risk and Insurance Design for FOB Exporters 概要
Overview
Under FOB, or Free on Board, the seller completes delivery by loading the goods on board the vessel nominated by the buyer at the named port of shipment. As a general rule, the risk of loss of or damage to the goods transfers to the buyer at that point.
Accordingly, where a casualty occurs at a vendor's warehouse, a manufacturer's plant, during inland carriage, at a port warehouse, in temporary storage, or during loading onto the vessel, the exporter may continue to bear the risk under the sales contract with the overseas buyer until delivery on board has been completed.
In practice, however, an exporter may assume that no insurance is required because the buyer arranges marine cargo insurance under FOB. This can leave the exporter without adequate insurance for the period during which it continues to bear the pre-shipment risk.
The issue is particularly significant for power-generation equipment, substation equipment, turbines, transformers, heavy machinery, project cargo, and plant components where the manufacturer or vendor is different from the contractual exporter. The domestic vendor may sell on an Ex Godown, ex warehouse, factory delivery, or warehouse delivery basis, while the exporter sells to the overseas buyer on FOB terms. The risk between domestic delivery and loading on board may therefore be concentrated on the exporter.
This article addresses the exporter's pre-shipment risk under FOB, domestic delivery expressions such as Ex Godown, casualties during inland carriage, storage and cargo handling, the buyer's insurance, possible use of FCA, and insurance design for the exporter.
Scope of This Article
| Item | Matters Covered in This Article | Matters Covered in Other Articles |
|---|---|---|
| Transfer of risk under FOB | The general on-board rule and exceptions caused by the buyer's defective nomination or notice | The article on costs, delivery, and transfer of risk under FOB addresses the complete FOB structure |
| Exporter's pre-shipment risk | The cargo risk borne by the exporter from the vendor's warehouse until loading on board | The article on initial response to export pickup and terminal-delivery claims addresses post-casualty action |
| Ex Godown and similar expressions | Non-standard domestic delivery expressions and the method of identifying the transfer of risk | The article on EXW and export-practice issues addresses the formal Incoterms® rule EXW |
| Inland carriage | Heavy-haul transport, drayage, special vehicles, and trailer transport | The article on accidents during domestic pickup of export cargo addresses carrier liability and claims |
| Storage and cargo handling | Port warehouses, temporary storage, crane operations, loading, and pre-loading risk | The article on export cargo storage and terminal-waiting casualties addresses warehouse liability |
| Exporter's insurance | Insurance design providing continuous cover from domestic pickup until delivery on board | The article on the duration of marine cargo insurance addresses the Transit Clause and termination of cover |
| Buyer's insurance | Attachment of the buyer's insurance, insurable interest, and its relationship with the exporter's risk | The article on insurable interest in cargo insurance addresses ownership and allocation of risk |
| Changing to FCA | Cases where FCA should be considered for containers or earlier delivery to the carrier | The article comparing FOB and FCA addresses the overall selection of the two rules |
| Claims against carriers and contractors | The need to separate cargo insurance from liability claims | The article on cargo claims against carriers addresses limitation of liability and claim deadlines |
| Delay loss | The distinction between physical cargo damage and delay, penalties, and loss of profit | The article on cargo insurance and project delay addresses specialist insurance for delay risks |
Basic Delivery and Risk Structure under FOB
Under FOB in Incoterms® 2020, the seller delivers the goods by loading them on board the vessel nominated by the buyer at the named port of shipment. As a general rule, the risk of loss of or damage to the goods transfers to the buyer at the same time as delivery.
FOB is a rule for sea or inland waterway transport. The seller completes export clearance and must load the goods onto the buyer-nominated vessel within the agreed period. The buyer arranges the contract of carriage and provides the seller with the vessel name, loading point, and required notice.
FOB does not impose an Incoterms® obligation on either party to arrange cargo insurance. Although the buyer commonly arranges insurance for the main carriage, the seller must identify and insure, where necessary, the risk it bears until delivery on board.
Incoterms® rules allocate delivery, risk, costs, and specified tasks under the contract of sale. They do not automatically determine transfer of title, payment terms, damages for breach of contract, carrier liability, or the scope of cover under an insurance policy.
Exceptions Where Risk May Transfer before Actual Loading
Loading on board is the general risk-transfer point under FOB, but the seller does not necessarily bear the risk until physical loading in every case.
If the buyer fails to give timely notice of the vessel, loading point, or loading time, if the nominated vessel fails to arrive as scheduled, or if it closes for cargo earlier than notified, risk may transfer to the buyer from the end of the agreed period or another point specified by the rule, provided that the goods have been clearly identified as the contract goods and the other applicable requirements are met.
A casualty occurring before loading on board should therefore not automatically be classified as the exporter's risk. The parties must review the vessel nomination, notice, delay, cargo closing time, agreed shipment period, and identification of the goods.
Because reliance on this exception after a casualty can create disputes over the sales contract, applicable Incoterms® edition, validity of notice, and identification of the goods, prudent insurance design should ordinarily assume that the exporter requires protection until loading on board.
Why FOB Uses the On-board Point
FOB assumes that the buyer nominates the vessel and the seller loads the goods directly on board that vessel. Delivery and transfer of risk coincide on board, connecting the seller's loading obligation with the main carriage arranged by the buyer.
This structure is generally compatible with conventional cargo, bulk cargo, heavy cargo, and other shipments where the seller or its port contractor remains involved until the goods are loaded onto the vessel.
For containerized cargo, however, the seller normally delivers the goods to a CY, CFS, or container terminal rather than loading them directly onto the vessel. The container may remain at the terminal for several days before loading.
The seller may therefore lose physical control while continuing to bear the risk under FOB. FCA may better reflect the actual logistics where risk should transfer when the goods are delivered to the carrier.
Contractual Structure Where the Vendor and Exporter Are Different
| Contract or Relationship | Common Condition | Possible Risk-transfer Point | Common Problem | Documents to Review |
|---|---|---|---|---|
| Exporter and overseas buyer | FOB Yokohama, FOB Kobe, or another Japanese port | Generally when loaded on board at the named port | The exporter may bear a casualty occurring before loading | Sales contract, purchase order, letter of credit, and Incoterms® edition |
| Domestic vendor and exporter | Ex Godown, ex warehouse, factory delivery, or warehouse delivery | The place and completion of the task specified in the domestic contract | Loading and risk transfer are unclear because the wording is non-standard | Domestic sales contract, purchase order, quotation terms, and delivery terms |
| Exporter and inland carrier | Trailer transport, heavy-haul transport, special vehicles, or drayage | Managed under the transport contract separately from the sales risk | The carrier's liability may be lower than the cargo value | Transport contract, conditions of carriage, cargo receipt, and route plan |
| Exporter and heavy-lift contractor | Lifting, loading, unloading, and lashing | Completion of a work stage does not itself determine sales risk | Contractor fault, packing defects, and defective lifting points may overlap | Method statement, lifting plan, equipment specification, and photographs |
| Exporter and warehouse or port contractor | Temporary storage, holding, terminal delivery, and port cargo handling | According to the storage or handling contract | Warehouse terms, exclusions, and liability limits may apply | Warehouse receipt, terminal record, storage terms, and work records |
| Overseas buyer and shipping line | The buyer arranges the vessel and ocean carriage | Generally upon loading on board under the FOB sale | Vessel delay or defective notice may cause an exceptional transfer of risk | Booking, vessel notice, cargo cut-off, and loading result |
| Overseas buyer and insurer | Buyer-arranged insurance attaching on board or from a warehouse | According to the policy attachment and insurable interest | An early attachment date does not necessarily insure the exporter's interest | Policy, From and To fields, Assured, and applicable clauses |
Where the vendor's risk ends at its warehouse but the exporter's risk under the overseas FOB sale continues until loading on board, the exporter may bear the risk throughout the intervening period.
This interval is the pre-shipment risk period addressed in this article.
Reviewing Ex Godown, Factory Delivery, and Warehouse Delivery
Ex Godown, ex warehouse, factory delivery, and warehouse delivery may have different meanings depending on the market, industry, and contract. They do not necessarily have the same legal effect as the formal Incoterms® rule EXW.
Even where the domestic contract states Ex Godown, the parties cannot determine responsibility after a casualty unless the following matters are clear:
- The formal name and address of the warehouse
- The exact point where delivery to the exporter or carrier is completed
- The party responsible for removal from the warehouse
- The party responsible for loading onto the collecting vehicle
- The party arranging the crane, forklift, and lifting equipment
- The party bearing the risk during loading
- The document or electronic record evidencing completion of delivery
- The party responsible for packing defects or defective lifting points
- The party arranging cargo insurance and the attachment point
The contract or purchase order should specify place, operations, costs, transfer of risk, and insurance arrangements rather than relying solely on the expression warehouse delivery.
Comparison of FOB, FCA, EXW, and the Exporter's Insurance
| Comparison Item | FOB | FCA at Exporter's Premises | FCA at Port Facility or CY | EXW |
|---|---|---|---|---|
| Transport mode | Sea or inland waterway only | All modes, including multimodal transport | All modes, including multimodal transport | All modes |
| Delivery point | On board at the named port of shipment | When loaded on the buyer's carrier at the exporter's premises | When delivered to the buyer's carrier at the named place | When placed at the buyer's disposal, generally before loading onto the collecting vehicle |
| Transfer of risk | Generally upon loading on board | Upon completion of loading onto the buyer's vehicle | Upon completion of delivery to the carrier at the named place | When placed at the buyer's disposal at the named place |
| Export clearance | Seller | Seller | Seller | Generally buyer |
| Suitability for containers | May create a gap because the seller does not control the container until loading | Often suitable for container pickup at the factory | Often suitable for delivery to a CY or CFS | May conflict with practical loading and export-clearance requirements |
| End of exporter's insurance | Generally delivery on board | Delivery onto the carrier's vehicle | Delivery to the carrier at the named facility | Delivery at the named place |
| Main caution | Vessel delay, port storage, and loading risk | The seller bears loading risk at its premises | The precise facility and delivery point must be stated | The buyer bears loading and generally export-clearance obligations |
| Suitability for project cargo | May be appropriate where the seller controls loading on board | May be appropriate where the buyer's carrier collects from the plant | May be appropriate where delivery occurs at a port facility | Can create disputes unless loading responsibility is expressly defined |
Pre-shipment Stages Where Casualties Frequently Occur
| Stage or Operation | Typical Casualty | Main Cause | Insurance Review | Evidence after a Casualty |
|---|---|---|---|---|
| Removal within the vendor's warehouse | Forklift impact, overturning, or packing damage | Narrow access, excess weight, or inadequate instructions | Whether cover attaches before internal movement | Surveillance footage, work record, and pre-removal photographs |
| Crane lifting | Dropping, lifting-gear failure, or deformation of lifting points | Incorrect centre of gravity, defective lifting points, or insufficient crane capacity | Whether lifting and loading are expressly covered | Lifting plan, equipment certificates, and rigging records |
| Loading onto the vehicle | Overturning on the trailer, impact, or support failure | Loading method, deck height, or insufficient supports | Whether loading is excluded as a pre-transit operation | Loading photographs, vehicle specifications, and worker records |
| Inland carriage | Overturning, collision, vibration, or rain damage | Road conditions, speed, securing, or defective weather protection | Whether special vehicles and heavy cargo were declared | Driving records, location data, accident certificate, and weather information |
| Unloading at the port warehouse | Crane impact, dropping, or base damage | Improper method, unsuitable equipment, or missing cargo information | Whether unloading forms part of the insured transit | Unloading record, photographs, and survey report |
| Port warehouse or temporary storage | Wet damage, rust, theft, or impact | Outdoor storage, prolonged holding, or inadequate waterproofing | Storage period, location, and time limitations | Entry record, storage layout, and inspection records |
| Barge transport or movement to ship's side | Seawater entry, dropping, or collision | Waves, movement of the craft, or transfer operations | Whether barge transport and ship-side handling are covered | Navigation record, weather and sea state, and work report |
| Loading on board | Dropping, ship-side impact, or collision inside the hold | Ship's crane, shore crane, or defective signalling | Whether cover continues until safe loading on board | Cargo-handling record, stowage plan, photographs, and Mate's Receipt |
| Securing after loading | Impact or movement during lashing | Securing operations, stowage defects, or defective supports | How FOB delivery and policy termination are defined | Stowage plan, lashing record, and loading-completion record |
Why Uninsured Periods Arise
The principal cause of an uninsured period is that each party evaluates risk under a different contract.
- The exporter assumes that the buyer arranges insurance because the sale is FOB
- The overseas buyer assumes that all pre-loading risk remains with the exporter
- The domestic vendor assumes that its risk ends at the warehouse or factory
- The inland carrier assumes that its liability insurance resolves the issue
- The port contractor assumes that liability is limited by its standard terms
- The buyer's insurer may reject a pre-loading loss because of the policy attachment or insurable interest
The result may be that no party has arranged first-party cargo insurance for the physical loss.
A carrier's, warehouse operator's, or cargo-handling contractor's liability insurance responds only to the legal or contractual liability established against that contractor, subject to policy limits and exclusions. It is not equivalent to cargo insurance protecting the exporter's cargo value.
Recovery may be incomplete where the casualty is caused by force majeure, a contractual exclusion, defective packing attributable to the exporter, or a limitation of liability.
Insurance the Exporter Should Design
Insurance design for an FOB exporter should follow the actual logistics sequence rather than the name of the insurance product. Each handling, carriage, and storage stage must be reviewed.
| Design Item | Review | Problem if Insufficient | Design Response |
|---|---|---|---|
| Attachment | Whether cover starts before warehouse removal, on domestic delivery, or after loading onto the vehicle | The first lifting or loading casualty is uninsured | Set attachment no later than the point at which the exporter's risk begins |
| Inland carriage | Ordinary vehicles, trailers, special vehicles, and barges | Failure to declare the transport method may affect cover | Declare equipment, route, dimensions, and weight in advance |
| Loading and unloading | Crane, forklift, rigging, and trailer-deck operations | The operation may be excluded as occurring before or after transit | Expressly include loading and unloading |
| Storage | Vendor warehouse, port warehouse, temporary storage, and outdoor storage | Storage beyond a period or at an undeclared location may be excluded | Declare location, period, indoor or outdoor conditions, and storage method |
| Loading on board | Movement to ship's side, crane handling, and safe placement on board | Cover may terminate on delivery to the CY or port warehouse | Confirm continuation until FOB delivery is completed |
| Packing | Export packing, centre of gravity, lifting points, waterproofing, corrosion protection, and supports | Loss may be excluded as insufficient packing or inherent vice | Use specifications, inspections, and independent review |
| Cargo-specific risk | Rust, vibration, deformation, humidity, temperature, and malfunction | Basic cover may be insufficient or causation may be difficult to prove | Consider cargo-specific endorsements and pre-shipment surveys |
| Sum insured | Cargo value, inland freight, handling, packing, and anticipated profit | The amount may be insufficient for replacement or remanufacture | Confirm the insured value and valuation basis |
| Deductible | Deductible per occurrence or package | Partial losses may be commercially unrecoverable | Set the deductible according to value and loss frequency |
| Preservation of recovery rights | Notice to the vendor, carrier, warehouse operator, and handling contractor | The insurer's subrogation rights may be prejudiced | Give prompt notice, reserve rights, and preserve evidence |
Information to Be Declared for Heavy and Project Cargo
Heavy and project cargo can produce a major loss and require lengthy repair or remanufacture. Insurers may assess the transport and handling method as well as the cargo itself.
The following information should ordinarily be provided before shipment:
- Cargo description, use, model, and value
- Dimensions, weight, and centre of gravity of each package
- Packing, waterproofing, corrosion protection, and supports
- Lifting points, lifting gear, spreader beams, and crane capacity
- Route from the vendor's warehouse to the port
- Bridges, road width, gradients, curves, and special-vehicle permits
- Trailers, transporters, barges, and cranes to be used
- Loading, unloading, temporary storage, and vessel-loading plans
- Expected storage period at the port
- Vessel type, hold or deck stowage, and stowage method
- Lashing, shoring, and dunnage plans
- Involvement of an independent surveyor or Marine Warranty Surveyor
Where prior approval, submission of a method statement, or survey attendance is a condition of insurance, the operation should not commence until the condition has been satisfied.
Why Inland Transit Insurance Alone May Be Insufficient
If inland transit insurance covers only truck transport from the vendor's warehouse to a port warehouse, it may not cover the exporter's complete pre-shipment risk.
The following stages may remain excluded or uncertain:
- Removal and lifting inside the vendor's warehouse
- Loading onto the collecting vehicle
- Unloading at the port warehouse
- Prolonged storage at a port warehouse or temporary yard
- Repacking, corrosion protection, and inspection
- Drayage within the port or barge transport
- Loading by ship's crane or shore crane
- Stowage and securing on board
Inland carriage, storage, and handling should therefore be reviewed as one continuous operation from the point at which the exporter's risk begins until FOB delivery, rather than only by reference to separate insurance product names.
Risk of Relying on the Vendor's Insurance
A vendor's property, transit, or liability insurance does not necessarily insure the exporter's interest.
If domestic delivery has been completed at the vendor's warehouse, the vendor may no longer own or bear the risk of the goods. Its insurance may therefore cease to apply after delivery.
Even where the vendor caused the casualty, full recovery may be unavailable because:
- Negligence cannot be established
- Another party designed the packing or lifting points
- A contractual exclusion or limitation of liability applies
- Indirect loss, delay, or penalties are excluded
- The vendor's liability-insurance limit is below the cargo value
- The insurer does not accept that the vendor has legal or contractual liability
The exporter must distinguish a potential recovery against the vendor from first-party compensation under its own cargo insurance.
Relationship with the Buyer's Insurance
Under FOB, the overseas buyer commonly arranges cargo insurance for the main carriage. The existence of the buyer's insurance does not by itself remove the exporter's pre-shipment risk.
The following matters should be reviewed:
- The location stated in the From field
- Whether cover attaches at the vendor's warehouse, on loading on board, or on the B/L date
- Whether the exporter's or seller's insurable interest is included
- Whether the buyer may claim for a casualty occurring before transfer of risk
- Whether seller's interest or contingent interest is covered
- Whether loading, storage, and pre-loading cargo handling are insured
- Whether the exporter may claim directly against the buyer's insurer
Even if the buyer's policy attaches at the vendor's warehouse, it may insure the buyer's future or contractual interest rather than the exporter's loss.
Payment to the buyer under its insurance also does not automatically discharge the exporter's liability under the sales contract. The buyer's insurer may pursue a subrogated recovery against the exporter, vendor, or contractor.
Distinguishing Cargo Damage from Project Delay
For power-generation, substation, and plant equipment, the financial loss caused by delay, suspension of works, or postponed commercial operation may exceed the cost of repairing or replacing the cargo.
Ordinary cargo insurance primarily covers physical loss of or damage to the cargo. It does not automatically cover:
- Contractual penalties caused by late delivery
- Delayed commencement of plant or power-station operations
- Standby costs for labour and equipment
- Increased financing costs or interest
- Loss of profit or market opportunity
- Cost of obtaining substitute equipment
- Rescheduling costs for the complete project
Where economic loss caused by delay must be insured, specialist project or delay insurance should be considered separately from ordinary cargo insurance.
Cases That Frequently Cause Practical Problems
| Case | Main Cause | Documents and Evidence | Decision Point | Initial Response |
|---|---|---|---|---|
| Crane drop at the vendor's warehouse | Defective lifting point, incorrect centre of gravity, or improper rigging | Domestic sales contract, lifting plan, equipment record, and photographs | Whether domestic delivery had occurred and who was responsible for loading | Stop work, preserve the cargo and lifting equipment, and notify the insurer |
| Overturning during trailer loading | Insufficient supports, sloping deck, or inadequate instruction | Loading plan, vehicle specification, work record, and surveillance footage | Whether the insurance attached before loading | Arrange a survey before repair or movement |
| Overturning during inland carriage | Speed, road conditions, centre of gravity, or defective securing | Driving records, accident certificate, lashing records, and route plan | Separate carrier liability from cargo insurance | Notify the police, insurer, and carrier and reserve all rights |
| Rust during port storage | Outdoor storage, prolonged holding, or inadequate waterproofing and corrosion protection | Entry photographs, storage location, weather data, and packing specification | Transit casualty, packing defect, or warehouse liability | Preserve the unpacking condition and agree on mitigation measures |
| Extended storage caused by a vessel change | Delay or booking change involving the buyer-nominated vessel | Vessel notice, change messages, shipment period, and storage records | Exceptional transfer of risk and extension of the insurance period | Notify the buyer and declare the extended storage to the insurer |
| Dropping during loading on board | Crane failure, defective signalling, or lifting-gear failure | Cargo-handling contract, crane record, daily report, and video | Whether delivery on board had been completed and who performed the operation | Notify the master, terminal, insurer, and contractors immediately |
| Impact damage on board | Contact during stowage or lashing | Mate's Receipt, stowage plan, lashing record, and photographs | Whether the casualty preceded or followed completion of FOB delivery | Secure the loading records and reserve rights without admitting liability |
| Buyer's policy attaches only after loading | Policy attachment or declaration error | Buyer's policy, B/L, casualty time, and loading record | Whether the casualty falls between the exporter's and buyer's insurance | Notify both insurers and review the policies before treating the loss as uninsured |
| Vibration damage caused by packing | Insufficient support, defective internal securing, or design error | Packing drawings, pre-shipment survey, vibration record, and repair report | Accidental transit loss, packing exclusion, or designer liability | Preserve the packing and compare it with the pre-shipment condition |
Decision Flow for Pre-shipment Risk
- Review the overseas sales contract to identify the named FOB port and applicable Incoterms® edition.
- Confirm the buyer's vessel nomination, loading point, shipment period, and notice obligations.
- Review the domestic vendor contract for the delivery place, transfer of risk, and loading responsibilities.
- Prepare a chronological map of all stages from the vendor's warehouse to loading on board.
- Identify the operator, custodian, contracting party, and cargo holder at each stage.
- Compare the exporter's, vendor's, carrier's, warehouse operator's, and buyer's insurance.
- Review the Assured, insurable interest, From and To fields, storage period, cargo handling, and exclusions under each policy.
- Correct any uninsured or uncertain stage through the exporter's insurance or amended contractual terms.
- For heavy cargo, submit the transport and handling plan to the insurer and confirm approval or survey conditions.
- Establish a notification procedure for vessel delay, vessel change, and extended storage.
- Determine casualty contacts, survey arrangements, evidence preservation, and procedures for reserving rights against carriers.
The central issue is not simply which party arranges insurance under FOB. The parties must identify the insurance protecting each relevant insurable interest throughout the period from domestic transfer of risk to delivery on board.
Scope of Freight Forwarder Involvement
These Standard Five Classifications are not legal classifications established by statute or universally accepted by the industry. They are an analytical framework used in this series to organize the scope of a freight forwarder's contractual and operational involvement.
| Standard Five Classifications | Main Involvement in the FOB Pre-shipment Period | Matters the Freight Forwarder May Confirm or Support | Liability Not Automatically Assumed | Additional Review |
|---|---|---|---|---|
| Simple Intermediary | Transmits booking information, terminal details, or documents | Vessel, cut-off, delivery place, and document requirements | Cargo insurance design, handling liability, or full cargo-value compensation | Whether insurance review or process control was included in the mandate |
| Cargo Transportation Service Provider | Arranges inland carriage, terminal delivery, or drayage | Route, contractor, vehicle, and casualty stage | Liability as the Actual Carrier for a stage it did not perform | The transport stage undertaken as Contracting Carrier |
| NVOCC / House B/L Issuer | May issue a House B/L and act as a Contracting Carrier | Place of receipt, port of loading, and transport scope under the House B/L | The seller's liability under the FOB sale or liability as a cargo insurer | The point at which its liability as Contracting Carrier begins |
| Door-to-Door Single Contractor | Undertakes the movement from the vendor's warehouse to loading on board or the overseas destination | All stages, subcontractors, storage locations, and handling plans | Placement of insurance where it has no lawful insurance-distribution authority | Whether the integrated contract and insured transit correspond |
| Agent / Coordinator for Specific Operations | Coordinates cranes, surveys, port operations, or casualty response | Communications, records, and work schedules within the mandate | Operational liability outside the mandate, coverage determinations, or settlement authority | Agency authority, instruction authority, and authority to admit liability |
Actual operations such as packing, storage, inspection, stowage, vanning, devanning, crane work, drayage, and lashing must be examined separately from the Standard Five Classifications. These operations do not replace the classifications and do not create an additional classification.
A freight forwarder's liability cannot be determined from the classification name alone. Its legal and contractual status as a Contracting Carrier or Actual Carrier, the services actually delegated, its performance of physical operations, the name on the transport document, applicable terms, and casualty-handling authority must be reviewed separately.
Where the freight forwarder is not an insurance agent or otherwise lawfully authorized to distribute insurance, it should not recommend a specific insurance product, make a definitive coverage determination, or place insurance. It should organize the transport stages and refer the shipper to an insurer or insurance agent.
Example 1: Transformer Dropped during Removal from a Vendor's Warehouse for Yokohama
Assume that a trading company purchases a transformer valued at JPY 180 million from a domestic manufacturer and sells it to an overseas power company under FOB Yokohama, Incoterms® 2020.
The domestic purchase order states only Ex Godown. A heavy-lift contractor appointed by the exporter lifts the transformer from the manufacturer's warehouse onto a trailer. During lifting, a lifting point deforms and the transformer drops approximately 30 centimetres, causing internal damage.
The manufacturer argues that its risk ended when the exporter's contractor took control of the cargo at the warehouse. The heavy-lift contractor argues that the lifting point designated by the manufacturer lacked sufficient strength and that its rigging was proper.
The exporter had inland transit insurance, but the policy attached only after loading onto the trailer had been completed. If the casualty occurred before completion of loading, that policy may not respond.
The parties must separately review the domestic delivery point, the party appointing the lifting contractor, responsibility for designing the lifting points, attachment of the cargo insurance, and the contractor's liability.
A survey should be conducted before the cargo is moved or dismantled, and the lifting points, lifting gear, method statement, crane records, and surveillance footage should be preserved.
Example 2: Turbine Components Overturning during Inland Carriage to Kobe
Assume that an EPC contractor purchases turbine components from several domestic vendors and sells the cargo, valued at JPY 95 million, to an overseas buyer under FOB Kobe.
The components are loaded onto a trailer at the vendor's plant. The trailer overturns on a curve while travelling to Kobe Port. The exporter alleges defective driving or securing by the inland carrier.
The carrier argues that the packing and supporting structure designed by the vendor could not withstand ordinary transport vibration and allowed the centre of gravity to shift. The vendor denies responsibility, stating that the exporter and carrier selected the transport and securing method.
Even if the exporter's cargo insurance covers an accidental inland transit event, an exclusion for insufficient packing or inherent vice may be relevant. A liability claim against the carrier requires separate examination of driving, speed, route selection, and securing.
The insurance claim and the liability claim are based on different rights. The exporter should notify the insurer and reserve all rights against the carrier, vendor, and packing designer without admitting liability.
Example 3: Rust during Extended Outdoor Storage Caused by Delay of the Buyer-nominated Vessel at Nagoya
Assume that an exporter sells large control equipment valued at JPY 260 million to an overseas plant company under FOB Nagoya. The cargo is delivered to a temporary port yard five days before the scheduled loading date.
The vessel nominated by the overseas buyer arrives 12 days late. The cargo remains outdoors under waterproof sheets, and strong wind and rain cause moisture to enter the packing, resulting in rust on part of the control equipment.
The exporter submits a claim under its insurance. The insurer identifies that the actual port-storage period exceeded the declared period and that no extension notice was given.
The exporter argues that risk had transferred to the buyer from the end of the agreed shipment period because the buyer-nominated vessel was delayed. The buyer responds that the exporter failed to protect the cargo adequately during outdoor storage.
The parties must review vessel and loading-point notices, the agreed shipment period, cause of delay, clear identification of the goods, notice to the buyer, notice of extended storage to the insurer, and waterproofing and corrosion-protection measures.
Because exceptional FOB risk transfer, extension of insurance, the duty to mitigate, and the port operator's responsibility overlap, advice from a lawyer experienced in marine insurance and international sales should be considered.
Common Misunderstandings
| Misunderstanding | Correct Analysis | Practical Caution |
|---|---|---|
| An FOB exporter does not need cargo insurance | The buyer may arrange main-carriage insurance, but the exporter generally bears the pre-loading risk | Review cover from domestic delivery until FOB delivery |
| Every casualty before loading is necessarily the exporter's risk | Defective vessel nomination or notice by the buyer may cause exceptional transfer of risk | Review the shipment period, notice, and identification of the goods |
| Ex Godown has the same meaning as EXW | Ex Godown is non-standard wording whose meaning depends on the contract | Specify place, loading, costs, and transfer of risk |
| The inland carrier's insurance guarantees full recovery | The carrier's insurance responds only to established liability within policy limits | Distinguish liability insurance from first-party cargo insurance |
| The buyer's warehouse-to-warehouse policy automatically insures the exporter | An early attachment point does not necessarily include the exporter's insurable interest | Review the Assured, insurable interest, and direct claim rights |
| FOB is always appropriate for containerized cargo | FCA may better reflect delivery to the carrier at a CY or CFS | Select the rule according to the actual delivery point |
| The exporter's risk ends on delivery to the port warehouse | Under FOB, risk generally continues until loading on board | Do not confuse CY delivery with FOB delivery |
| ICC(A) necessarily covers defective packing | Insufficient or unsuitable packing may be excluded | Document the packing specification and pre-shipment condition |
| Cargo insurance covers project delay | Ordinary cargo insurance primarily covers physical loss or damage | Consider specialist insurance for delay loss |
| A freight forwarder arranging transport assumes liability for every stage | Liability depends on contractual status, mandate, actual operations, and applicable terms | Confirm its status as Contracting Carrier or Actual Carrier |
Decision Checklist
| Review Stage | Party to Consult | Item to Confirm | Action if a Problem Is Identified |
|---|---|---|---|
| Before the overseas sales contract | Overseas buyer, sales staff, and legal staff | Named FOB port, Incoterms® edition, shipment period, and vessel notice | State the precise port, point, and notice obligations |
| Before placing the domestic order | Vendor, purchasing staff, and legal staff | Delivery place, loading, transfer of risk, and packing responsibility | Replace abstract Ex Godown wording with specific terms |
| When arranging insurance | Insurer and insurance agent | Attachment, termination, carriage, storage, handling, and cargo characteristics | Amend the policy to provide continuous cover until loading on board |
| When planning heavy-haul transport | Carrier, heavy-lift contractor, and surveyor | Dimensions, weight, centre of gravity, lifting points, route, and equipment | Revise the method and obtain insurer approval |
| Before removal from the vendor's warehouse | Vendor, contractor, and insurer | Cargo condition, packing, lifting points, and attachment of insurance | Conduct a pre-shipment survey and correct defects |
| On entry into the port warehouse | Warehouse operator, freight forwarder, and insurer | Storage location, expected period, waterproofing, corrosion protection, and continuation of cover | Arrange indoor storage or an extension of the storage period |
| When the vessel or schedule changes | Overseas buyer, shipping line, freight forwarder, and insurer | Reason for change, shipment period, extended storage, and transfer of risk | Notify the buyer and extend the insurance and storage conditions |
| Before loading on board | Port contractor, master, freight forwarder, and surveyor | Crane, lifting gear, stowage position, and method statement | Stop unsafe work and revise the method or equipment |
| Immediately after a casualty | Insurer, contractor, carrier, and vendor | Time, place, operation, custodian, and cargo condition | Preserve evidence and notify all parties without admitting liability |
| When submitting the insurance claim | Insurer and insurance agent | Other insurance, recovery targets, amount of loss, and method of repair or remanufacture | Disclose other insurance and obtain approval or a survey before repair |
| When liability is disputed | Insurer, maritime lawyer, and legal staff | Sales contract, transport contract, policy, notices, and deadlines | Reserve rights and consider legal action before expiry of any time bar |
When to Consult a Maritime Lawyer
Routine casualty notification, survey arrangements, and insurance claims should generally be handled with the insurer or insurance agent. Advice from a lawyer experienced in marine insurance, international sales, or international carriage should be considered where:
- The exporter and overseas buyer dispute the FOB risk-transfer point
- Exceptional risk transfer caused by the buyer's vessel nomination or notice is in issue
- The vendor disputes the meaning of Ex Godown or another domestic delivery condition
- The vendor, carrier, warehouse operator, and handling contractor each deny responsibility
- The insurer relies on insufficient packing, non-disclosure, or excess storage to reject the claim
- Both the buyer's insurance and the exporter's insurance deny cover
- A foreign insurer pursues a subrogated recovery against the exporter
- The cargo claim is accompanied by penalties, late-delivery claims, or project-delay claims
- A carrier notice period, insurance claim deadline, or litigation time bar is approaching
- The loss is substantial and the parties cannot agree on repair, remanufacture, or substitute delivery
Recovery under cargo insurance and contractual liability to the vendor, carrier, or overseas buyer are separate matters. Negotiations under one claim should not result in failure to notify or preserve rights under another.
Summary
Under FOB, the seller generally bears the risk until the goods are loaded on board the vessel nominated by the buyer at the named port of shipment. The common practice of the buyer arranging marine cargo insurance does not automatically insure the exporter's pre-shipment risk.
Where the domestic vendor and exporter are different and the domestic sale uses Ex Godown, factory delivery, or warehouse delivery, the exporter may bear the risk between domestic delivery and FOB delivery.
This period can include warehouse removal, crane operations, loading onto a vehicle, inland carriage, port storage, unloading, drayage, loading on board, and stowage. Inland transit insurance alone may exclude some storage and handling operations.
The exporter's insurance should follow the actual logistics rather than the product name. Attachment, termination, storage periods, loading and unloading, crane work, cargo-specific risks, packing, and preservation of recovery rights must be reviewed separately.
FCA may be more appropriate for containers or where delivery to the carrier occurs before loading on board. Where FOB remains necessary for heavy or project cargo, the central insurance issue is continuous protection from the vendor's delivery point until delivery on board.
