Cargo Insurance for Used Machinery and Parts — Replacement Clause, New for Old and Depreciation

This page is a translation for reading support. The Japanese article is the official version. For legal, customs, insurance, or regulatory decisions, please confirm against the Japanese original and the relevant parties.

Used Machinery, Used Parts, and the Replacement Clause

The topic of used machinery, used parts, and the Replacement Clause involves practical considerations on how to assess repair or replacement costs as losses when used machinery, equipment, parts, or devices sustain damage during transportation.

In marine cargo insurance for used machinery and parts, even if damage occurs during transit, it is necessary to confirm the pre-incident condition, deterioration caused by the incident, repair methods, replacement parts, and cargo value from a perspective different from that applied to new cargo.

Especially when the Replacement Clause is involved, simply deciding to "replace broken parts with new ones" or to "pay the full repair cost" is insufficient as a practical approach.

Used goods may have wear, rust, corrosion, signs of use, performance degradation, part lifespan limitations, pre-existing damage, or maintenance issues prior to the incident.

Therefore, it is necessary to separate damage newly caused by an accidental event during transportation from conditions that existed before the incident.

In addition, replacing used parts with new parts may result in the machinery being in better condition after repair than before the incident. This difference is handled as a matter of New for Old, differential gain/loss between new and used parts, or the application of Depreciation Deduction.

However, using new parts does not automatically mean a fixed percentage deduction will apply. Actual judgment requires reviewing the wording of the applicable Replacement Clause, the pre-incident condition, the nature of the parts, repair methods, the necessity of using new parts, and the pre-incident value.

Scope Covered in This Article

Theme Content Covered in This Article Related Themes for Detailed Review
Replacement Clause Handling how repair and replacement costs are addressed for partial damage to machinery cargo. Institute Replacement Clause, Replacement Clause
Used Machinery and Used Parts Distinguishing between wear, rust, deterioration, pre-existing damage, performance decline, and transport accident damage. Used Goods Clause, New for Old, Depreciation Deduction
Condition Before Incident Verifying pre-incident condition through pre-shipment photos, operation checks, maintenance records, and operating hours. Cargo Damage Inspection, Evidence Preservation
Packing Deficiencies Addressing insufficient securing, inadequate protection, insufficient anti-rust measures, and poor weight distribution. Packing Deficiency and Insurance Exclusions
Intrinsic Cargo Characteristics Organizing inherent wear, deterioration, performance decline, corrosion, and component lifespan of used goods. Intrinsic Cargo Characteristics
Spare Parts and Replacements Handling cases where used parts are unavailable and new or improved parts are used instead. Spare Parts and Replacement Arrangement and Cargo Insurance
Value Before Incident Organizing year model, operating hours, maintenance status, used market price, and resale value. Insured Value, Economic Total Loss
Scope of Freight Forwarder Involvement Organizing pre-acceptance checks, packing records, accident notification, survey arrangement, and documentation based on the Standard Five Classifications. Freight Forwarder Liability, NVOCC Liability
Uncovered Damages Distinguishing pre-existing damage, normal wear, poor maintenance, performance deficits, and business interruption. Damages Not Covered by Marine Cargo Insurance

This article serves as an introductory overview for damage handling of used machinery and used parts.

For individual cases, please verify the wording of the Replacement Clause incorporated in the insurance policy, pre-incident condition, details of the transport accident, repair feasibility, type of replacement parts, pre-incident value, and reasonableness of repair costs on a case-by-case basis.

Reasons Used Machinery Often Causes Problems

Unlike new cargo, used machinery does not have a uniform condition before the incident.

Even machines of the same model and year can vary greatly in value and performance depending on factors such as operating environment, hours of use, maintenance status, storage conditions, repair history, overhauls, and parts replacement history.

Therefore, when damage or defects are discovered after arrival, it often becomes problematic to determine whether these resulted from an accident during transportation or if they existed beforehand.

Category New Cargo Used Machinery / Used Parts Insurance Considerations
Condition Before Incident Generally assumed to have consistent quality and performance as new May have history of use, wear, rust, existing damage, and performance decline Without pre-incident documentation, distinguishing transport damage is difficult
Cause of Damage Damage such as shocks, wetting, and cargo handling incidents during transport can be relatively confirmed Requires differentiation from pre-existing defects, poor maintenance, parts lifespan, and aging deterioration Confirm whether damage in each area is transport-related or pre-existing
Repair / Replacement Often restored to pre-incident state by replacing with new parts Replacement with new parts can sometimes improve condition beyond pre-incident state New for Old or Depreciation Deduction may become relevant
Valuation Invoice price or new price used as a reference Valuation varies based on year, operating hours, maintenance, market price, and rarity Verify balance between pre-incident value and repair costs
Required Documentation Post-incident photos, invoice, and repair estimates may suffice Pre-incident photos, operation verification, maintenance records, and pre-packaging photos are important Post-incident documents alone may not adequately explain pre-incident condition
Total Loss Judgment Comparison between new price and repair costs is easier Repair costs may exceed pre-incident value of used goods Confirm economic total loss or reasonableness of repair

With used machinery, the mere fact that it was broken upon arrival does not automatically prove damage due to an accident during transport.

It is necessary to compare the condition before and after the incident to clarify which parts were newly damaged or deteriorated due to an accidental event during transportation.

Replacement Clause, New for Old, and the Relationship with Depreciation Deduction

Concept Basic Meaning Situations Where It Arises with Used Machinery Points to Note
Replacement Clause A clause that defines the scope of repair or replacement costs for partial damage to machinery or equipment When repairing or replacing parts such as specific components, control panels, motors, or control devices Confirm the actual wording of the clause as incorporated in the contract.
Institute Replacement Clause An Institute Clause that stipulates repair and replacement costs for damaged parts of machinery cargo When considering costs for replacing damaged parts, transportation costs, installation costs, etc. The handling may differ depending on the version, amended clauses, and specific contract terms.
New for Old The improvement in condition or value resulting from replacing used or secondhand parts with new ones When the service life, performance, or market value is improved compared to before the accident Individually confirm whether the full replacement cost is treated as damage.
Depreciation Deduction The concept of adjusting repair costs by subtracting value or service life consumed prior to the accident When replacing consumables, worn parts, or parts with a clearly defined service life with new ones This deduction is not always applied uniformly at a fixed rate.
Pre-existing Damage Scratches, rust, breaks, losses, or malfunctions that existed before transport began When the timing of damage found after an accident is unclear Separate confirmation from damage newly caused by the transport accident is required.
Pre-accident Value The reasonable value of used machinery or used parts immediately before the accident When comparing repair costs, total loss amount, and residual value This is not necessarily determined solely by the invoice price.

Relationship with Replacement Clause

The Replacement Clause is a clause that specifies how to handle the repair or replacement costs of damaged parts in machinery cargo.

For used machinery, this clause becomes an issue when repairing damaged parts involves replacing them with equivalent used parts, when only new parts are available, or when replacement with higher-grade parts is considered.

For new goods, it is easier to explain that replacement with identical new parts restores the condition to that before the accident.

On the other hand, with used items, replacement with new parts may result in improved durability, performance, reliability, or market value compared to the state before the accident.

Items to Check Details to Confirm Insurance Perspective Points to Note
Damaged Parts Which parts, functions, exterior, or control systems were damaged Confirm the reasonable scope of repair or replacement for the damaged parts. Do not confuse with the replacement cost of the entire machine.
Condition Before Accident Usage period, wear, repair history, and remaining service life of the parts Generally, consider restoration to the condition before the accident. Delineate any improvements beyond the pre-accident condition.
Repair Feasibility Whether repair is possible or replacement is necessary Confirm if the repair method is reasonable and economical. Verify grounds for impossibility of repair based on the manufacturer's or repairer's opinion.
Replacement Parts Whether used, equivalent, new, or higher-grade parts are used Confirm whether restoration is equivalent to the accident condition or includes performance improvements. If only new parts are available, prepare documentation for non-availability.
Incidental Costs Part freight, customs duties, installation fees, test operation costs, etc. Confirm if these costs are reasonable and necessary for restoration. Separate costs for modification, capacity enhancement, or maintenance.
Pre-accident Value The relationship between repair costs and the pre-accident value of the entire machine Confirm whether repairs are economically reasonable. If repair costs exceed the pre-accident value, consider total loss settlement.

Common Practical Cases in Used Machinery

Case Dispute Regarding Pre-Accident Condition Key Points for Judgment Main Reference Materials Initial Response
Exterior panels are dented with impact marks on the packaging Whether the dent existed before the incident Whether the damage location on the packaging matches that on the machinery Pre-packaging photos, unpacking photos, remarks upon receipt, Survey Report Preserve packaging materials and the machinery before any repairs.
Motor fails to start after arrival Possible internal malfunction prior to the incident Whether there is a causal link with impact or water damage during transportation Pre-shipment trial run, shock records, insulation measurements, repair shop report Consult with the surveyor on diagnosis methods before disassembly.
Control panel is damaged, and identical replacement parts are discontinued Whether restoration with used parts is possible Whether new or substitute parts must be used Manufacturer’s response, discontinuation proof, substitute part specifications, estimates Do not discard existing parts; document their condition before replacement.
Extensive rust found on machine surface Whether rust occurred during transportation or corrosion existed pre-incident Compare rust progression, packaging, rust prevention, and water damage marks Pre-shipment photos, rust prevention records, packaging records, water damage inspection Preserve samples, photos, and water damage areas before rust removal.
Control system replaced with a new, higher-end model Overlap of repair restoration and performance improvement Whether standard functions and additional features can be separated Comparison of old and new specifications, price difference, manufacturer’s opinion Separate standard specifications and added features in the estimation.
Repair costs exceed purchase price of the used machine Whether the purchase price properly reflects pre-accident value Which is reasonable: repair, replacement purchase, or residual value Repair estimate, used market price, appraisal, residual value estimate Discuss the possibility of a total economic loss before starting repairs.
Accuracy deficiency confirmed after transportation Whether accuracy had declined before the incident Whether there is a difference between pre-shipment accuracy check and post-arrival inspection Inspection certificate, trial run records, shock records, foundation fixing records Re-measure after confirming installation conditions.
Some parts are missing Possibility that parts were missing before packing Whether packing list matches pre-packaging photos Packing details, pre-shipment photos, unpacking records, weight records Do not discard packaging materials; verify quantities.

Distinguishing Aging Deterioration from Accident Damage

The most important aspect in handling damage claims for used machinery is to differentiate between aging deterioration, pre-existing damage, and transport accident damage.

Marine cargo insurance generally covers damage caused by accidental events during transportation.

Wear and tear, rust, corrosion, performance decline, part lifespan, poor maintenance, or normal usage deterioration existing before the accident are distinguished separately from transport accident damage.

Type of Damage / Defect Judgment Criteria Key Verification Materials Perspective in Insurance
External Damage during Transportation Whether dents, breakage, bending, or abrasion marks match packaging damage or impact marks Packaging photos, unpacking photos, remarks at receipt, Survey Report May be considered accidental damage occurring during transportation.
Pre-existing Rust and Corrosion Confirm timing of occurrence by rust color, progression, extent, and storage conditions Pre-shipment photos, storage records, inspection reports, expert opinions May be treated as pre-existing damage or aging deterioration.
Wear and Tear Check operational hours, part lifespan, and replacement history Operating hours records, maintenance records, part replacement history, manufacturer’s opinion Differentiates normal usage deterioration from transport accident damage.
Internal Part Malfunctions Whether there is a causal relationship with shocks, vibrations, or moisture damage during transportation Operational verification, impact records, repair reports, pre-accident inspections Requires careful judgment if no connection to external damage can be confirmed.
Performance Decline Whether performance decline existed before the accident or worsened after it Test run records, inspection certificates, post-arrival inspection Confirms whether functional impairment is due to transport accident or aging deterioration.
Missing Parts Whether parts fell off during transportation or were missing before packaging Pre-packaging photos, packing list, weight records, unpacking records Difficulty in judging accident-relatedness if timing of loss cannot be established.
Damage Caused by Inadequate Packaging Whether fixing, protection, rust prevention, moisture prevention, or weight distribution were insufficient Packaging specifications, fixing photos, vanning photos, work records Exemption due to packaging defects or responsibility of packaging contractor may be contested.

Verification of Pre-Existing Damage

Pre-existing damage refers to scratches, dents, rust, corrosion, breakage, missing parts, performance degradation, or internal defects that existed prior to the start of transportation.

Damage discovered for the first time after an accident does not necessarily mean it occurred during transit.

In particular, with used machinery, the premise is that it has already been utilized, so surface scratches, paint peeling, rust, or wear may be present.

Therefore, if the condition before shipment has not been documented, it becomes difficult to determine whether damage found after an accident is attributable to the insured event.

Pre-Accident Documentation Information That Can Be Verified Effective Documentation Method Points to Note
Pre-shipment Photographs Scratches, dents, rust, missing parts, and overall exterior condition Take close-up photos of the entire machine and each face Ensure the shooting date and machine identification are clear.
Pre-packaging Photographs Condition of cargo immediately before packaging Include nameplates, serial numbers, and areas prone to damage Take care not to confuse photos with those of another identical machine.
Operational Check Records Pre-accident operation status, accuracy, functions, and abnormal noises Preserve trial run videos, measurement data, and inspection reports Record power conditions and test methods as well.
Maintenance Records Repair, overhaul, and parts replacement history Record dates, work details, and parts replaced Confirm any periods without maintenance.
Seller’s Condition Description Condition at the time of sale as a used product Retain the Condition Report, contracts, and emails Verify conditions such as "as-is" sale status.
Invoice Entries Transaction conditions regarding used, defective, or pre-repair items Clearly specify product name, year, model, and condition Simply stating "Used Machinery" may not accurately specify the condition.

New for Old and Depreciation Deduction

A particular issue with used machinery and used parts is New for Old and Depreciation Deduction.

When a used part before the accident is replaced with a new one during repair, the machinery’s useful life, reliability, precision, or market value may improve compared to its pre-accident condition.

If the full cost of the new part is recognized as the damage amount, this could result in recovery beyond the pre-accident state.

On the other hand, when used parts are not available on the market and new parts must be used for safety reasons, using new parts itself may be reasonable.

Replacement/Repair Content Main Issue Key Reference Documents Practical Approach
Replace with equivalent used parts Whether restoration is close to pre-accident condition Estimates, specifications, condition, and sourcing of used parts Confirm equivalence, remaining useful life, and price reasonableness.
Replace used parts with new parts Possibility of better condition than before accident New part estimates, pre-accident condition, availability of used parts Confirm the handling of New for Old or Depreciation Deduction.
Only new parts are available Whether the necessity of new part replacement can be justified Manufacturer supply confirmation, discontinued product information, repairer report Document the necessity and cost reasonableness of using new parts.
Replace with upgraded or improved parts Includes performance improvement or added functions Comparison of old and new specifications, price difference, manufacturer response Separate accident restoration costs from improvement costs.
Replace the entire machine Possibility that partial repair would suffice Proof of irreparability, pre-accident value, full replacement estimate Confirm the scope of the Replacement Clause and economic rationality.
Simultaneous replacement of consumables Possibility of including regular replacements unrelated to the accident Maintenance plans, parts lifespan, replacement timing Separate accident restoration parts from regular maintenance parts.

Cases Where New Parts Must Be Used

Even when repairing used machinery, there are practical cases where new parts must be used.

For example, when the same used parts are no longer available on the market, when the manufacturer supplies only new parts, when the use of used parts is not possible for safety reasons, or when reusing used parts is not appropriate due to precision requirements.

In such cases, the use of new parts itself is not immediately considered unreasonable.

However, documentation is required to explain the reasons for needing new parts, the investigation of equivalent used parts, whether there is any performance improvement due to the new parts, and the reasonableness of the price.

Verification Item Main Documents Reason for Verification Notes
Used Parts Market Inventory Supplier responses, used market search results, multiple quotations Confirm whether used parts are truly unavailable Decisions should not be made based on a single supplier’s response alone.
Manufacturer Supply Status Manufacturer responses, discontinued parts certificates, parts lists Confirm if only genuine new parts or substitutes are available Verbal responses should be documented in writing.
Safety Manufacturer opinions, regulations, inspection standards Confirm whether use of used parts is permissible Distinguish between replacements required for safety and those for performance improvement.
Specification Equivalence Comparison tables of old and new specifications, drawings, technical materials Confirm whether substitute parts are equivalent in function to pre-damage parts Separate any additional functionality.
Price Reasonableness Multiple quotations, manufacturer prices, transportation cost details Confirm whether restoration costs are reasonable Emergency fees and rush charges should also be individually confirmed.

Pre-Accident Value of Used Machinery

For used machinery, it is important to verify the pre-accident value.

Unlike new machinery, the value of used machinery is not necessarily determined by simply deducting a fixed percentage from the new price.

The value varies depending on the year of manufacture, operating hours, maintenance status, overhaul, rarity, resale potential, market price, accessories, and installation location.

Evaluation Item Details to Confirm Main Reference Materials Notes
Year and Model Manufacture year, model, type, serial number Nameplate photo, specifications, manufacturer documents, invoice Even the same model can differ by manufacture year and specifications.
Operating Hours Cumulative usage hours, usage frequency, and operating history Meter readings, maintenance records, usage history Operating hours affect residual value.
Maintenance Status Periodic maintenance, parts replacement, and overhaul Maintenance logs, inspection reports, repair history Values vary depending on maintenance condition even with the same manufacture year.
Pre-Accident Operating Condition Whether it was operating normally before shipment Operation check, test run videos, inspection certificates Check if there were any issues before the accident.
Used Market Price Market price for similar type, year, and condition Sales records, appraisals, specialist quotations, auction data Distinguish between asking price and actual sale price.
Rarity Availability of replacement machines and special specifications Market research, manufacturer response, expert opinions Rarity does not necessarily translate to higher valuation.
Accessories Tools, control panels, jigs, software, and spare parts Packing lists, specifications, photos Avoid double counting with the main unit value.
Comparison with Repair Costs Whether repair costs are reasonable compared to pre-accident value Repair estimates, replacement purchase quotes, pre-accident value documents High repair costs could warrant considering economic total loss.

In the Case of Individual Used Parts

Similar issues arise in the transport of individual used parts.

For used parts, the residual value, usability, wear condition, resale value, and remaining service life are key considerations.

When damage is found after an incident, it is important to verify whether the damage occurred during transport or was pre-existing wear from prior use.

If used parts are replaced with new parts, the difference between the pre-incident value of the used parts and the price of the new parts often becomes a point of discussion under New for Old or Depreciation Deduction.

For individual parts, it is essential to confirm the model type, serial number, operating hours, operational status at removal, and storage conditions.

Required Documents

In damage handling for used machinery and used parts, photographs taken after the incident alone may not be sufficient.

Documents showing the condition before the incident form the basis for distinguishing transport accident damage from pre-existing damage.

Document Type Verification Documents Contents to Confirm Notes
Sales / Value Documents Sales contract, invoice, quotation, appraisal documents Pre-incident value, sales terms, and cargo details Distinguish between used value and new reference price.
Pre-incident Condition Documents Pre-shipment photos, pre-packaging photos, condition reports, inspection records Scratches, rust, deterioration, missing parts, and pre-existing damage Most important for comparison with post-incident damage.
Operation / Maintenance Documents Operation checks, test run videos, maintenance records, inspection reports Operational status before the incident and internal malfunctions Check test methods and measurement conditions as well.
Cargo Identification Documents Year of manufacture, model, serial number, nameplate photos, specifications Identity of subject cargo and repair/replacement parts Avoid confusion with same model or similar parts.
Post-incident Documents Damage photos, unpacking photos, remarks at receiving, survey reports Extent of damage caused by the transport accident Keep records before, during, and after unpacking.
Repair / Replacement Documents Repair estimates, parts quotations, manufacturer opinions, repairer reports Repair methods, replacement parts, and necessity of costs Clearly state reasons for using new parts.
Packing / Transport Documents Packing specifications, securing photos, vanning photos, transport records Impact, cargo shift, water damage, and packing deficiencies Distinguish responsibilities of packing contractor and carrier.
Insurance Documents Insurance policy, Replacement Clause, insurance request, special conditions Applicable conditions, insured value, and deductibles Confirm not only standard clauses but also any individual amendments.

Distinguishing Between Cargo Insurance and Forwarder Liability

Category Main Subject Points to Confirm Main Documents Practical Actions
Cargo Insurance Physical damage to the used machinery or used parts themselves Whether the damage was caused by an accidental event during the insurance period Insurance policy, before-and-after photos of the incident, survey report, repair estimates Report the accident to the insurance company or insurance agent.
Forwarder Liability Legal liability of the forwarder or NVOCC to the cargo owner Whether there was negligence in packing, securing, arrangement, instructions, or selecting the carrier Instructions received, booking confirmation, work instructions, contract, emails Verify liability separately from the cargo insurance claim.
Claim Against Carrier Impact, overturn, wetting, or cargo handling accidents during transportation Whether the accident occurred within the carrier’s controlled segment B/L, remarks at receipt, transport records, photos Send a claim letter within the notification deadline.
Claim Against Packing Contractor Insufficient securing, inadequate protection, inadequate rust prevention or moisture control Whether the packing method was appropriate for the cargo weight and transport mode Packing specifications, photos, work records, expert opinion Confirm the packing contract and liability limitations.
Issues on the Cargo Owner’s Side Pre-existing damage, insufficient condition explanation, incorrect value declaration Whether the pre-incident condition was accurately declared before acceptance Invoice, condition description, photos, order documents Separate from insurance accident damage for proper sorting.
Quality Issues with the Seller Defects, performance shortfalls, or missing parts existing before the incident Whether the quality and delivery conditions under the sales contract were met Sales contract, inspection records, pre-shipment operation checks May be considered a sales issue rather than a transportation accident.

Freight Forwarder Standard Five Classifications and Used Machinery Incidents

The Five Classifications in this article do not represent legally or industry-wide established categories but serve as an analytical framework to organize the scope of freight forwarder involvement in this series.

Classification Main Involvement Before Contract Acceptance / Shipment Main Involvement After Incident Discovery Involvement in Insurance and Subrogation Areas Not Naturally Assumed
1. Simple Intermediary Acts as a liaison among cargo owners, carriers, packers, and insurance-related parties. Assists with communication of incident notifications, photographs, estimates, and survey arrangements. Supports forwarding existing documents and serves as the contact point for related parties. Does not guarantee pre-incident conditions, repair costs, or insurance claim payments.
2. Cargo Transportation Service Provider Confirms the actual carrier and packing conditions for the contracted transport segment. Obtains transport records, incident reports, and photographs from subcontractors. Preserves rights toward the Actual Carrier and others according to the contract scope. Does not naturally assume responsibility for pre-existing damages undisclosed by the cargo owner.
3. NVOCC / House B/L Issuer Accepts transport as the Contracting Carrier on the House B/L. Receives incident notifications from cargo owners and collects Master B/L and actual transport records. Confirms contractual liabilities and notifies or seeks recourse from the Actual Carrier or subcontractors. Does not naturally imply that maintenance or operational checks on used machinery have been personally conducted.
4. Door-to-Door Single Contractor Integrates arrangements for pickup, packing, ocean transport, and inland delivery. Aggregates incident records, packing documentation, and delivery materials for all segments. Identifies incident segments and oversees subrogation and replacement transport with subcontractors. Does not assume all pre-existing defects or wear and tear, regardless of cause.
5. Agent/Coordinator for Specific Operations Coordinates inspections, packing, surveys, repairs, or replacement part arrangements within the scope of delegation. Coordinates manufacturer diagnostics, estimate procurement, preservation of evidence, and inspection scheduling. Communicates with insurance companies, surveyors, and repair firms within the delegation scope. Does not undertake damage assessments, insurance decisions, or cost assumptions beyond the delegation.

The terms Contracting Carrier and Actual Carrier represent legal or contractual statuses and do not replace the Standard Five Classifications.

Also, individual tasks such as packing, inspection, repairs, parts procurement, or surveys do not themselves constitute a sixth classification.

Example 1: Damage to Control Panel of Used Machine Tool During Transportation

Suppose a used machine tool was imported, and after arrival, damage to the exterior of the control panel and a malfunction in the internal circuit board were identified.

There are impact marks on the outside of the wooden crate near the control panel area, and pre-packaging photos show no exterior damage to the control panel.

In this case, it is relatively straightforward to demonstrate a causal relationship between the exterior damage to the control panel and impact during transportation.

On the other hand, for the internal circuit board malfunction, it is necessary to determine whether the fault existed before transportation or was newly caused by an impact during transit.

Comparisons are made between pre-shipment test run videos, error logs, manufacturer diagnoses, the condition of the damaged circuit board, and impact records.

If the same type of used control panel cannot be sourced and a new control panel is to be used, information on discontinued status by the manufacturer, substitute product specifications, and price differences should be confirmed.

If the new control panel includes additional functionalities or performance improvements, estimates should separate the repairs necessary for accident recovery from the enhancement portions.

Specific Example 2: Motor Did Not Operate Upon Arrival

When transporting used manufacturing equipment, suppose there is no noticeable external damage, but the main motor fails to start after arrival.

In this case, the fact that the motor does not operate upon arrival alone cannot determine internal damage caused by a transport accident.

First, confirm whether a test run was conducted under actual power conditions before shipment, and review the motor’s insulation resistance, operating hours, maintenance history, and past abnormality records.

Next, verify if any overturning, dropping, strong impact, wetting, or prolonged vibration occurred during transportation.

If there are no impact records and the winding deterioration or bearing wear has progressed over a long period, aging or pre-existing defects may be the main issues.

Conversely, if packaging damage, impact records, and deformation of internal parts coincide, consider the causal relationship with a transport accident.

Before dismantling or disposing of the motor, arrange for the surveyor and repairer to be present to preserve evidence for cause investigation.

Example 3: Replacing Discontinued Parts with Superior Compatible Models

If the control unit of a used packaging machine becomes unusable due to water damage during transport, and upon inquiry with the manufacturer it is confirmed that the old control unit model is discontinued and only the current superior compatible model can be supplied, the following applies.

The superior compatible model includes communication and diagnostic functions that were not available in the original control unit before the incident.

In this case, the necessity of using the new model and the performance improvements due to additional functions should be separately confirmed.

It should be confirmed in writing by the manufacturer that the old parts are no longer obtainable and that the machine cannot be restored without the new parts.

Then, costs corresponding to the basic control functions equivalent to those before the incident should be distinguished from costs related to the additional communication functions or modifications.

The total replacement cost with the new parts is not automatically considered as damage caused by the incident. The application of the Replacement Clause, pre-incident value, and New for Old handling should be confirmed.

Furthermore, if the replacement/modification costs are excessive relative to the pre-incident value of the entire machine, alternatives other than repair should also be compared.

Common Misconceptions

Misconception Practical Considerations Points to Confirm
It is possible to claim damage from a transport accident without photos taken before the incident Used machinery may already have scratches, rust, deterioration, or defects prior to the accident. Pre-shipment photos, pre-packaging photos, operation checks, inspection records
The cost of replacement with new parts is fully covered by insurance If the condition after replacement is better than before the accident, issues such as New for Old may arise. Condition before the accident, presence of used parts, necessity of new parts
New for Old does not apply to used goods With used goods, the improvement in value or service life due to new part replacement is precisely the issue. Usage period, wear, replaced parts, price difference
If the machinery does not operate after arrival, it is a transport accident There may have been internal defects or performance degradation prior to the accident. Operation checks, repair reports, impact records, external damage
Damage amount can be judged solely by the invoice price The value of used machinery varies according to model year, operating hours, maintenance condition, and market price. Appraisal, market price, maintenance records, value before the accident
If repair costs are covered, business interruption losses can also be claimed Physical damage considered by marine cargo insurance is separate from operational stoppage or loss of profit. Repair costs, delay damages, distinction from operational stoppage damages
If the manufacturer recommends new parts, replacement with new parts is required The technical necessity, availability of alternative used parts, and repair feasibility should be confirmed. Manufacturer’s opinion, multiple estimates, evidence of irreparability
Even if repair costs are high, repairs must always be carried out Comparison with pre-accident value, residual value, and alternative purchase cost is necessary. Repair estimates, pre-accident value, alternative purchase price
Depreciation Deduction is always calculated solely based on years The nature of the parts, usage conditions, remaining lifespan, and contract terms should be confirmed individually. Operating hours, maintenance records, parts lifespan, policy wording

Checklist for Decision-Making in Freight Forwarder Operations

Stage of Confirmation Items to Confirm Sources for Confirmation Actions if Issues Arise
Prior to Acceptance Whether the cargo consists of used machinery/used parts or has variable condition Cargo owner, invoice, sales contract, cargo details Request acquisition of pre-incident condition documentation.
Before Shipment Availability of photos, operation checks, maintenance records, and list of existing damages Cargo owner, seller, inspection agency Explain potential evidential issues due to insufficient documentation.
At Packing Weight, center of gravity, securing, protection, rust prevention, moisture control, and vibration measures Packing specifications, photos, vanning records Consider additional packing or revising securing methods.
At Insurance Placement Insurance amount as used goods, Replacement Clause, and special conditions Insurance policy, insurance request, insurer's response Verify that the insured value is a reasonable used value, not a new value.
Upon Accident Discovery Damage locations, packing damage, unpacking condition, and remarks at receipt Cargo owner, warehouse, delivery company, photos, delivery receipt Preserve the cargo before repair, movement, or disposal.
When Confirming Accident Cause Whether it is a transportation accident or pre-existing damage, aging deterioration, or poor maintenance Pre-incident photos, maintenance records, Survey Report Do not conclude based on guesswork; obtain expert opinions.
When Checking Repair Estimates Scope of repair, replacement parts, necessity of new parts, and incidental costs Repair estimate, manufacturer’s opinion, parts estimate Separate costs between accident restoration and improvement/maintenance.
When Confirming Value Pre-accident value, repair cost, residual value, and replacement machine price Appraisal, market price, multiple estimates Confirm economic rationality of the repairs.
When Consulting the Insurer Pre- and post-accident condition, accident cause, repair method, and valuation documents Insurance policy, photos, estimates, Survey Report Do not independently decide payment eligibility; report officially.
When Claiming Third Party Recovery Potential liability of carrier, packer, warehouse, etc. B/L, work records, accident notification, contract terms Observe notification periods carefully and send a Claim Letter.
When Explaining to the Cargo Owner Pre-existing damage, aging deterioration, New for Old, and pre-accident value Insurer’s response, surveyor’s opinion, repair estimate Avoid definitive statements such as "full cost of new replacement will be paid."

Accident Notification and Subrogation

When a transport accident involving used machinery is suspected, preliminary accident notification should be made to the insurance company, insurance agent, and all potentially responsible parties without waiting for the cause to be confirmed.

The notification deadlines and claim filing periods to carriers, warehouses, packers, or stevedores vary depending on the B/L, carriage terms, warehouse contracts, packing agreements, and applicable laws.

The accident notification should include the cargo description, model, serial number, date and time the damage was discovered, packaging condition, remarks upon receipt, and a request to preserve relevant evidence.

If repair or disassembly is to be started, the concerned parties should be given an opportunity to attend, and damaged parts prior to replacement must be preserved.

Situations to Consider Consulting a Maritime Lawyer

When the responsibility relationship between the Contracting Carrier named on the House B/L and the Actual Carrier who performed the transport becomes an issue, consulting a maritime lawyer should be considered.

Early consultation is also important when disputes arise over repair costs, pre-accident value, constructive total loss, liability limitation, or governing law regarding high-value used machinery.

When foreign manufacturers, shipping lines, packers, sellers, and buyers are involved, and contracts or evidence preservation across multiple countries are required, confirmation of jurisdiction, arbitration clauses, and claim deadlines becomes necessary.

At the time of consultation, it is advisable to organize the B/L, insurance policy, sales contract, pre- and post-accident photos, operational verification, repair estimates, manufacturer opinions, survey reports, and accident notifications.

Practical Points

In the practical handling of used machinery, used parts, and Replacement Clauses, not only repair and replacement costs but also the condition prior to the incident are important to verify.

Used items may have aging deterioration, pre-existing damage, wear, rust, performance decline, and parts lifespan issues that need to be distinguished from damage caused by transportation accidents.

If replacement with new parts is required, confirm the application of New for Old and Depreciation Deduction, the necessity of using new parts, and the availability of alternative used parts.

Secure pre-incident photos, inspection records, maintenance records, operation confirmation, repair estimates, manufacturer opinions, and Survey Reports as early as possible.

Also, separate the types of damage evaluated under marine cargo insurance, the restoration costs requested by the cargo owner, and the legal liabilities borne by the freight forwarder or carrier for clearer understanding.

Summary

Regarding used machinery, used parts, and the Replacement Clause, it is important to distinguish between damage caused by transportation accidents, pre-existing damage, deterioration over time, New for Old considerations, and the pre-accident value.

Used goods may already have wear, rust, deterioration, signs of use, performance degradation, or internal defects before transportation begins.

Therefore, it is necessary to verify whether damage found after an accident actually resulted from an accidental event during transport.

Even if replacement with new parts is required, the full cost of such replacement is not automatically covered by insurance.

The availability of equivalent used parts, the necessity of using new parts, differences from pre-accident condition, performance improvements, and deterioration due to aging should be reviewed.

If repair costs are high relative to the pre-accident value of the used machinery, one should compare partial repairs, replacement equipment purchase, residual value, and the possibility of constructive total loss.

Freight forwarders and NVOCCs should confirm their contractual status and scope of involvement according to the Standard Five Classifications, then engage in obtaining pre-accident condition documentation, accident notification, arranging surveys, collecting repair documents, and cooperating in third-party claims.

This article organizes general practice of marine cargo insurance for foreign-going cargo and international logistics but does not guarantee insurance payouts, repair costs, the application of Depreciation Deduction, New for Old application, pre-accident valuation, or third-party legal liability in individual cases. Actual decisions should involve confirming the insurance policy, applicable Replacement Clause, pre- and post-accident documentation, repair estimates, manufacturer opinions, and Survey Reports on a case-by-case basis.

Marine cargo insurance terms vary by policy more than by premium. For insurance valuation of used machinery and used parts, Replacement Clauses, costs for new part replacement, and New for Old considerations, please consult specialized insurance companies or insurance agents.